Actions needed to boost textile recycling, BIR told

Around 73% of used textiles are still destined for energy recovery or for landfilling whereas only 1% are recycled in a closed loop, the textiles division of the Bureau of International Recycling heard last week.

A range of actions to promote textile recycling were advocated by the guest speaker at the BIR textiles meeting

And, the textiles industry is the fourth-largest CO2 emitter, according to Prof. Dr-Ing. Stefan Schlichter of Germany’s Institut für Textiltechnik. “So where we are is not that impressive,” he declared in his guest presentation on the pursuit of a circular textiles economy, delivered to the textiles Division meeting in Amsterdam on May 24.

Among the many challenges for recycling, the speaker highlighted the incorporation into products of “too many different materials – often only for price reasons”. Design for recycling, upcycling, greater product durability and repair strategies were all identified by him as key building blocks for circularity.

In order to meet these challenges, Prof. Schlichter listed the following needs:

  • intensified research on alternative technologies;
  • the development of optimised take-back systems/concepts for textiles waste management;
  • the development of industrial-scale chemical recycling as a future add-on to maintain upcycling;
  • development of automatic sorting;
  • and optimisation of mechanical recycling.

Having calculated that between 150 and 250 additional recycling facilities would be required in the years to 2030, the guest speaker insisted: “We need government help to build up this industry.”

‘Easier to recycle’

In a subsequent panel discussion moderated by Alan Wheeler of the UK’s Textile Recycling Association, BIR textiles division president Martin Böschen of TEXAID Textilverwertungs AG in Switzerland, underlined that “we need to develop more products that are easier to recycle”. And he added: “We need new applications for what we can make out of the textiles.”

Josse Kunst of low-energy polyester recycling specialist CuRe Technology BV in the Netherlands underlined that coatings on fibres and poor labelling were among the factors that could hamper recycling or even render a product unrecyclable, whereas the aim of good design should be to create products suitable for “disassembly in an economical way”. He also called for increased data sharing and for the introduction of minimum recycled content requirements.


Jean-François Gryspeert of Belgium-based sorting and baling systems supplier Valvan supported the idea of recycled content requirements while also underlining the need for increased product durability and a reduction in the number of fibre blends used.

Following on from an observation by Mr Kunst that now was the time to capitalise on “low-hanging fruit” to prove concepts rather than on conducting more studies, Prof. Schlichter concluded the meeting by stating: “We need to have a certain push so everyone in the chain starts to move.” This should include, he added, “defining a certain percentage of recycled content”.

About BIR
Founded in 1948, BIR was the first federation to support the interests of the recycling industry on an international scale. Today, BIR represents more than 30,000 companies around the globe, with a direct membership of over 950 companies and 37 national associations from 70 countries. Together, these members form the largest international recycling federation.

Share this article with others

Subscribe for free

Subscribe to receive our newsletters and to leave comments.

Back to top

Subscribe to our newsletter

Get the latest waste and recycling news straight to your inbox.