Picking Station 10 Bay / 16 Man System

• Reinforced Feeder Box
• Large Spill Plate
• 1x 620 Trommel Screen ( 15mm square holes )
• Over size conveyor from trommel
• 1x 620 trommel screen ( 30mm square holes )
• Over size conveyor
• Cross Band magnet
• 1x Airknife ( 15kw )
• Flip Flow
• 1x Airknife ( 10kw )
• Lights Cage ( blowing non picked material into lights cage )
• Cabin enclosing the 8 picking bays
• Control panel

Feeder Box ( 4.182 metres )

• High feeder box attached to back of 620 trommel
• Spill Plate low end of the feeder box to the ground

1^st Trommel Screen 620 ( 8 metres long )

• 15mm screen throughout
• Bunkered bay below
• 4WD system

Oversize Conveyor 8 metres to 2^nd 620 Trommel

• 1000mm wide conveyor / Chevron belt

2^nd Trommel Screen 620 ( 8 metres long )

• 30mm screen throughout
• Bunkered bay below
• 4WD System

Oversize Conveyor ( 11 metres to picking station )

• 1000mm wide conveyor / Chevron Belt

Picking Station ( 10 bay / 16 man System )

• Width of Picking Station 4.2 metres
• Bay widths 3.5 metres
• Bay depth 5.3 meters
• Bunkered bays
• Cross Band Magnet
• 1^st Airknife 15kw, 2^nd Airknife 10kw
• Flip flow under picking station belt
• Lights cage
• Picking station cabin

Electrical

• Electrical control panel

To power the system you will need to provide an isolator with enough power to run the complete system ( 81kw / 162 amps )

Price       £200, 000 + VAT ( NO OFFERS )

Purchasing company must be able to dismantle and transport the equipment themselves